FM ADA KIT 1

Large-Area Value Kit

Product Highlights

  • Range of up to 1,000 feet
  • Lifetime PLUS Limited Warranty (90 days on accessories)
  • Meets new 2010 ADA accessibility guidelines
  • Made in USA

Description

The Americans with Disabilities Act (ADA) requires public facilities to provide equal access to people with disabilities, including those who are hard-of-hearing. The Williams Sound FM ADA Kit 1 is a convenient and economical solution for satisfying these requirements. This kit provides everything you need to accommodate individuals for hearing accessibility in large venues such as auditoriums, theaters, conferences and houses of worship. The PPA T27 transmitter broadcasts a speakers voice, music program or audio source wirelessly up to 1000 feet to a listening audience.

System Includes

(1) PPA T27 transmitter
(2) PPA R37 receivers
(2) BAT 001-2 AA alkaline batteries
(2) EAR 013 single mini earbuds
(2) NKL 001 neckloops
(1) IDP 008 ADA wall plaque
(1) ANT 021 Antenna
(1) TFP 036 Power Supply
T27 ada kit 1

Features

  • Range of up to 1,000 feet
  • Lifetime PLUS Limited Warranty (90 days on accessories)
  • Meets new 2010 ADA accessibility guidelines
  • Made in USA

Applications:

Houses of worship
Universities
Auditoriums
Theaters
Conferences
Libraries

Specifications

ANT 021

Used with

PPA T45, PPA T45NET, PPA T27 Transmitters

Connector type

Screw to PCB

Cable type

N/A

Nominal Impedance

75 Ohms

Length

9 inches

BAT 001-2

Alkaline, 1.2 Volt

EAR 013

Plug

3.5 mm mono

Cord length

39 inches

Impedance

32 Ohms

Frequency Range

20 - 20kHz

Max input power

5mV

Sensitivity

128dB @ 1kHz

Driver size

13 mm

Weight

9g

Replacement earpad

EAR 015

IDP 008

10-3/8" (L) x 6-¼" (W) x 1/8" (H)

PPA R37 Architectural and Engineering Specifications

  • The PPA R37 receiver shall be encased in black, PC/ABS impact-resistant plastic with a hinged battery door. The receiver shall be a body-pack style and include a detachable belt-clip for hands-free operation. The receiver shall have a 3.5mm stereo/mono jack to accommodate stereo or mono low impedance earphones, headphones and neckloops. The receiver shall have a combination volume control with power on/off rotator dial. It shall have a green LED indicating battery and system status codes. The R37 shall have access to 17 preset wideband channels between 72-76MHz. Channel selection shall be made by pushing the seek button inside the battery compartment. The receiver shall have channel-lock capability.
  • The receiver shall have a slide switch inside the battery compartment to select disposable Alkaline or NiMH rechargeable battery operation. It shall have charger contacts on the bottom of the receiver for use with Williams Sound drop-in chargers CHG 3512 and CHG 3502. The R37 shall operate up to 50 hours with two disposable AA Alkaline batteries and up to 32 hours with two AA NiMH rechargeable batteries (BAT 026).
  • The receiver shall provide a maximum out of 35mW at 16ø with an earbud type earphone. The systems audio frequency response shall be 200Hz to 15kHz ± 3dB and the signal to noise ratio shall be 65dB min. The receiver sensitivity shall be 2μV or better at 12dB Sinad with squelch defeated. The R37 shall accept up to ±75kHz FM deviation and have a 75 μ s de-emphasis time constant.
  • The R37 shall have FCC, Industry Canada approvals and be compliant with RoHS and WEEE regulations. The receiver shall be covered by a Lifetime PLUS Limited Warranty, excluding earphones, headphones and batteries.
  • This receiver model shall be the Williams Sound model PPA R37.

PPA R37

Dimensions:4.1" x 2.85" x 1.38" (104 x 72 x 35mm)
Weight:4.6oz (130g) with batteries. 2.6oz (73g) without batteries     
Color:Black
Battery Type:(2) AA Alkaline or 2 x AA NiMH    
Battery Life:Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50 hrs
 (2) AA rechargeable NiMH batteries (BAT 026), 1500 mAh, approx. 32 hrs
Current Consumption:52mA nominal
Temperature Range:– 0 to 50C
Channels17, accessed via seek button in battery compartment
Operating Freq.:72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz*
Intermediate Freq.:75 kHz
FM Deviation:75 kHz
De-Emphasis:75 µS
LED Indicator:Power:  Green; Low Battery:  Flashes Green
AFC Range:± 120 kHz
Sensitivity:2 µV at 12 dB Sinad with squelch defeated
Input Overload:100 mV
Frequency Response:200 – 15 kHz
Modulation:FM, +/- 75 kHz peak deviation
Signal-to-Noise Ratio:65 dB min @ 100 uV
Receive Antenna:Integral with earphone/headphone cord
Audio Output:35 mW max, peak into 16 ohms
Output Connector:3.5 mm stereo/mono phone jack
Earphone:Earbud-type with foam cushion, 3.5 mm plug, 32 Ω
Auto Shut-offEnters sleep mode after approx 6 mins of no RF signal
Approvals:FCC, Industry Canada, RoHS, WEEE
Warranty:Lifetime PLUS Limited Warranty, 90 Days on most accessories.

PPA T27 Architectural and Engineering Specifications

  • The transmitter shall be housed in a heavy duty black plastic case 4.1" x 6.1" x 1.3". It shall be microprocessor controlled with push button configuration. It shall have an operating range of up to1000ft. with optional ANT 005. It shall have seventeen wideband channels operating on the hearing assistance bandwidth between 72 MHz to 76 MHz. There shall be a ‘rubber duckie’ antenna output through the top of the enclosure.

Front Panel

  • The front panel shall have a push button controlled LED digital display showing the frequency selection. Once a frequency is selected, there shall be a lock or unlock feature by holding down both the up and down frequency buttons for three seconds. There shall be a 3.5mm mono microphone input jack for two wire electret microphones. It shall have a rotary input level control. There shall be up and down frequency select buttons.

Back Panel

  • The transmitter shall be powered by a 24VAC power supply via a 5 pin DIN connector. It shall have a 75 Ohm F-connector antenna output. It shall have a Line-level, high impedance RCA, mono/unbalanced input.
  • The transmitter shall have FCC, Industry Canada approvals, be compliant with RoHS and WEEE regulations, and be powered by a UL and CSA approved power supply. It shall be covered by a Lifetime PLUS Limited Warranty. It shall be compatible with Williams Sound FM equipment operating on 72 MHz to 76 MHz.

The transmitter shall comply with FCC Part 15.

The transmitter shall be the Williams Sound model number PPA T27.

PPA T27

Dimensions & Weight:4.1" W x 6.1" L x 1.3" H (104.1 mm x 154.9 mm x 33 mm)
7.8 oz. (221 g)
Color:Black
Power (U.S./Canada):105-130 VAC, 50-60 Hz, 3.2 W at 120 VAC
Operating Frequencies:72-76 MHz*: 72.1 (CH A), 72.2 (CH K), 72.3 (CH B), 72.4 (CH N), 72.5 (CH C), 72.6 (CH O), 72.7 (CH D), 72.8 (CH P), 72.9 (CH E), 74.7 (CH I), 75.3 (CH J), 75.4 (CH R), 75.5 (CH F), 75.6 (CH S), 75.7 (CH G), 75.8 (CH T), 75.9 (CH H)
Frequency Selector:External switches, 17 channels (lockable)
RF Field Strength:Does not exceed 80mV/m @ 3m
Nominal Range:Up to 1000 feet (305 m) w/standard ANT 021 “rubber duckie" antenna or optional ANT 005 coaxial antenna.
Modulation:FM, 75 kHz deviation (wide–band) max.
Stability:± .005% over 0-50˚C
Pre-Emphasis:75 µS
Frequency Response:85Hz - 14kHz ±3dB
Distortion:1% Max. THD
Signal to Noise Ratio:65 dB with R35 Receiver
Microphone Input:3.5mm mini phone jack, supplies +DC for electret mics
Mic Input Level:1–10 mV, nominal
Line-Level Input:RCA Jack, Hi Z, unbal.
Line Input Level:.1–1 Vrms, nominal
Input Attenuator:Pot, screwdriver-adjustable
Antenna Outputs:Thread mount for ANT 021 “rubber duckie" antenna or ANT 025 telescoping antenna  RF connector for ANT 024 dipole or ANT 005 coaxial antenna
Approvals:FCC including part 15*, Industry Canada, RoHS, WEEE
Warranty:Lifetime PLUS Limited Warranty, 90 Days on most accessories.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

*Effective July 11, 2016, the FCC has mandated tighter emissions limits on auditory assistance transmitters (72-76 MHz) manufactured or imported after this date to help avoid interference with and/or degradation of other airborne signals (All products manufactured prior to July 11, 2016, are compliant).  Williams Sound FM transmitters – PPA T46, PPA T27 and PPA T45 (all models) – all have received a Grant of Certification from the FCC and are fully compliant/approved under this new mandate.

 

 

TFP 036

Input: 120 VAC, 60 Hz, 15 W

Output: 12 VAC, 800 mA

 

Other Models

FM ADA KIT 37

FM ADA KIT 37 RCH Includes same as FM ADA KIT 37, except batteries are rechargeable.

Accessories for FM ADA KIT 1

EAR 008 Over-ear, hook earphone

EAR 013 Single mono earbud

EAR 013 T Single Mini Earphone w/ Eartip

EAR 014 Dual Mini Earbuds

EAR 014 T Dual mini earbud w/ Eartips

EAR 041 Single, in-ear, isolation earphone

EAR 042 Dual, in-ear, isolation earphones

HED 021 Folding Headphones (Mono)

HED 024 Folding Headphones (Stereo)

HED 026 Rear-wear, mono headphones

HED 027 Heavy-duty, folding, mono headphones

HED 040 Hearing-protector, dual ear muff headphones

IDP 008 ADA Wall Plaque

NKL 001 Neckloop 18" (mono plug)

downloads

Download/ViewNameTypeLanguage
ADA Hearing Assistance Plaque Manuals English
PPA VP 37 Manual Español Manuals Español
FM Brochure - High Res Brochures English
PPA VP 37 Manual Manuals English
FM Brochure - Low Res Brochures English
FM ADA KIT 1 Specification Specifications English

Videos

We have no other products in this category.